Please use this identifier to cite or link to this item:https://hdl.handle.net/20.500.12259/88430
Type of publication: Straipsnis konferencijos medžiagoje Clarivate Analytics Web of Science ar/ir Scopus / Article in Clarivate Analytics Web of Science or Scopus DB conference proceedings (P1a)
Field of Science: Aplinkos inžinerija / Environmental engineering (T004)
Author(s): Jasinskas, Algirdas;Domeika, Rolandas;Šarauskis, Egidijus;Mieldažys, Ramūnas;Kučinskas, Vytautas;Annuk, Andres
Title: Research in oak waste preparation and utilization for burning
Is part of: Engineering for rural development : 14th international scientific conference : proceedings, May 20-22, 2015. Jelgava, 2015, Vol. 14
Extent: p. 210-215
Date: 2015
Keywords: Oak bark;Leaves;Mixture;Mill;Pellet;Properties;Fractional composition;Ash content;Calorific value
Abstract: Various kinds of wood waste may be also used as biofuel – not only in the industry and furniture obtained waste timber, but also small branches, tree bark, leaves. In Lithuania, oak is a well growing and highquality wood; therefore, it is appropriate to investigate the oak waste preparation and utilization for burning. In the paper, test results of oak bark, leaves and their mixture preparation for the burning process (milling, pelleting) and the prepared pellet properties (moisture content, density, ash content, calorific value) are presented. Research investigations were carried out in laboratory basis of the Institute of Agricultural Engineering and Safety, Aleksandras Stulginskis University, Lithuania. Fractional composition of oak bark, leaves and their mixture mill was determined on sieves with holes of various diameters after chopping and milling of the investigated oak waste. The biggest mill fraction was accumulated on 0.25 mm sieves – from 30.9 to 46.2 %, and too big amount of dust was found – from 22.0 to 24.3 %. Prepared oak bark, leaves and their mixture pellet moisture content ranged from 8.1 to 12.5 %, and bulk density – from 975.8 to 1122.2 kg·m-3 DM (dry matter). The ash content of oak waste was very high, varied from 10.4 to 14.7 % and was about 10 times higher than wood-based biofuels. The determined calorific value when burning of oak bark, leaves and their mixture pellets varied from 17.3 to 17.7 MJ·kg-1. This calorific value of oak waste pellets was relatively high, close to the calorific value of some herbal plants and wood species. The presented research results show that oak bark, leaves and their mixture can be used as a solid biofuel because the main parameters of this plant satisfy the main requirements for solid biofuels
Internet: http://www.tf.llu.lv/conference/proceedings2015/Papers/035_Jasinskas.pdf
Affiliation(s): Vytauto Didžiojo universitetas
Žemės ūkio akademija
Appears in Collections:Universiteto mokslo publikacijos / University Research Publications

Files in This Item:
marc.xml9.26 kBXMLView/Open

MARC21 XML metadata

Show full item record

Page view(s)

20
checked on Aug 16, 2019

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.